Group ByΒΆ
The group_by function allows you to group one or more columns and apply a function to the result. Specifically, the group_by function performs the following actions on an H2O Frame:
- splits the data into groups based on some criteria
- applies a function to each group independently
- combines the results into an H2OFrame
The result is a new H2OFrame with columns equivalent to the number of groups created. The returned groups are sorted by the natural group-by column sort.
The group_by function accepts the following parameters:
Python and R
- H2O Frame: This specifies the H2OFrame that you want the group by operation to be performed on.
by: Thebyoption can take a list of columns if you want to group by more than one column to compute the summary.
Python Only
na, which controls treatment of NA values during the calculation. It can be one of:all(default): any NAs are used in the calculation as-is; which usually results in the final result being NA too.ignore: NA entries are not included in calculations, but the total number of entries is taken as the total number of rows. For example,mean([1, 2, 3, nan], na="ignore")will produce1.5.rm: entries are skipped during the calculations, reducing the total effective count of entries. For example,mean([1, 2, 3, nan], na="rm")will produce2.
R Only
gb.control: In R, thegb.controloption specifies how to handle NA values in the dataset as well as how to name output columns. Note that to specify a list of column names in thegb.controllist, you must add thecol.namesargument.nrow: Specify the name of the generated column.na.methods, which controls treatment of NA values during the calculation. It can be one of:
all(default): any NAs are used in the calculation as-is; which usually results in the final result being NA too.ignore: NA entries are not included in calculations, but the total number of entries is taken as the total number of rows. For example,mean([1, 2, 3, nan], na="ignore")will produce1.5.rm: entries are skipped during the calculations, reducing the total effective count of entries. For example,mean([1, 2, 3, nan], na="rm")will produce2.Note: If a list smaller than the number of columns groups is supplied, then the list will be padded by
ignore.
In addition to the above parameters, any number of the following aggregations can be chained together in the group_by function:
count: Count the number of rows in each group of a GroupBy object.max: Calculate the maximum of each column specified incolfor each group of a GroupBy object.mean: Calculate the mean of each column specified incolfor each group of a GroupBy object.min: Calculate the minimum of each column specified incolfor each group of a GroupBy object.mode: Calculate the mode of each column specified incolfor each group of a GroupBy object.sd: Calculate the standard deviation of each column specified incolfor each group of a GroupBy object.ss: Calculate the sum of squares of each column specified incolfor each group of a GroupBy object.sum: Calculate the sum of each column specified incolfor each group of a GroupBy object.var: Calculate the variance of each column specified incolfor each group of a GroupBy object.
If no arguments are given to the aggregation (e.g.,max()ingrouped.sum(col="X1", na="all").mean(col="X5", na="all").max()), then it is assumed that the aggregation should apply to all columns except the GroupBy columns.
Note that once the aggregation operations are complete, calling the GroupBy object with a new set of aggregations will yield no effect. You must generate a new GroupBy object in order to apply a new aggregation on it. In addition, certain aggregations are only defined for numerical or categorical columns. An error will be thrown for calling aggregation on the wrong data types.
> library(h2o)
> h2o.init()
# Import the airlines data set and display a summary.
> airlinesURL <- "https://s3.amazonaws.com/h2o-airlines-unpacked/allyears2k.csv"
> airlines.hex <- h2o.importFile(path = airlinesURL, destination_frame = "airlines.hex")
> summary(airlines.hex)
# Find number of flights by airport
> originFlights <- h2o.group_by(data = airlines.hex, by = "Origin", nrow("Origin"), gb.control=list(na.methods="rm"))
> originFlights.R <- as.data.frame(originFlights)
> originFlights.R
Origin nrow_Origin
1 ABE 59
2 ABQ 876
3 ACY 31
...
# Find number of flights per month
> flightsByMonth <- h2o.group_by(data = airlines.hex, by = "Month", nrow("Month"), gb.control=list(na.methods="rm"))
> flightsByMonth.R <- as.data.frame(flightsByMonth)
> flightsByMonth.R
Month nrow_Month
1 1 41979
2 10 1999
# Find the number of flights in a given month based on the origin
> cols <- c("Origin","Month")
> flightsByOriginMonth <- h2o.group_by(data=airlines.hex, by=cols, nrow("NumberOfFlights"), gb.control=list(na.methods="rm")
> flightsByOriginMonth.R <- as.data.frame(flightsByOriginMonth)
> flightsByOriginMonth.R
Origin Month nrow_NumberOfFlights
1 ABE 1 59
2 ABQ 1 846
3 ABQ 10 30
4 ACY 1 31
5 ALB 1 75
...
# Find months with the highest cancellation ratio
> which(colnames(airlines.hex)=="Cancelled")
[1] 22
> cancellationsByMonth <- h2o.group_by(data = airlines.hex, by = "Month", sum("Cancelled"), gb.control=list(na.methods="rm"))
> cancellation_rate <- cancellationsByMonth$sum_Cancelled/flightsByMonth$nrow_Month
> rates_table <- h2o.cbind(flightsByMonth$Month,cancellation_rate)
> rates_table.R <- as.data.frame(rates_table)
> rates_table.R
Month sum_Cancelled
1 1 0.025417471
2 10 0.009504752
# Use group_by with multiple columns. Summarize the destination, arrival delays, and departure delays for an origin
> cols <- c("Dest", "IsArrDelayed", "IsDepDelayed")
> originFlights <- h2o.group_by(data = airlines.hex[c("Origin",cols)], by = "Origin", sum(cols),gb.control = list(na.methods = "ignore", col.names = NULL))
# Note a warning because col.names null
> res <- h2o.cbind(lapply(cols, function(x){h2o.group_by(airlines.hex,by="Origin",sum(x))}))[,c(1,2,4,6)]
> res
Origin sum_Dest sum_IsArrDelayed sum_IsDepDelayed
1 ABE 5884 40 30
2 ABQ 84505 545 370
3 ACY 3131 9 7
4 ALB 3646 49 50
5 AMA 317 4 6
6 ANC 100 0 1
>>> import h2o
>>> h2o.init()
# Upload the airlines dataset
>>> air = h2o.import_file("https://s3.amazonaws.com/h2o-airlines-unpacked/allyears2k.csv")
>>> air.dim
[43978, 31]
# Find number of flights by airport
>>> originFlights = air.group_by("Origin")
>>> originFlights.count()
>>> originFlights.get_frame()
Origin nrow
-------- ------
ABE 59
ABQ 876
ACY 31
...
# Find number of flights per month based on the origin
>>> cols = ["Origin","Month"]
>>> flights_by_origin_month = air.group_by(by=cols).count(na ="all")
>>> flights_by_origin_month.get_frame()
Origin Month nrow
-------- ------- ------
ABE 1 59
ABQ 1 846
ABQ 10 30
...
# Find months with the highest cancellation ratio
>>> cancellation_by_month = air.group_by(by='Month').sum('Cancelled', na ="all")
>>> flights_by_month = air.group_by('Month').count(na ="all")
>>> canceled = cancellation_by_month.get_frame()['sum_Cancelled']
>>> flights = flights_by_month.get_frame()['nrow']
>>> month_count = flights_by_month.get_frame()['Month']
>>> ratio = canceled/flights
>>> month_count.cbind(ratio)
Month sum_Cancelled
------- ---------------
1 0.0254175
10 0.00950475
[2 rows x 2 columns]
# Use group_by with multiple columns. Summarize the destination, arrival delays, and departure delays for an origin
>>> cols_1 = ['Origin', 'Dest', 'IsArrDelayed', 'IsDepDelayed']
>>> cols_2 = ["Dest", "IsArrDelayed", "IsDepDelayed"]
>>> air[cols_1].group_by(by='Origin').sum(cols_2, na ="ignore").get_frame()
Origin sum_Dest sum_IsDepDelayed sum_IsArrDelayed
-------- ---------- ------------------ ------------------
ABE 5884 30 40
ABQ 84505 370 545
ACY 3131 7 9
ALB 3646 50 49
AMA 317 6 4
ANC 100 1 0
...